Latest Product :
Home » , » Hitachi Excavators ZAXIS240

Hitachi Excavators ZAXIS240

Hitachi Excavators ZAXIS240
Specifications :
ENGINE
Model Isuzu AH-4HK1X
Type 4-cycle water-cooled, direct injection
Aspiration Turbocharged, intercooled
No. of cylinders 4
Rated power ISO 9249, net 132 kW (177 HP) at 2 000 min-1 (rpm)
Rated power ECC 80/1269, net 132 kW (177 HP) at 2 000 min-1 (rpm)
Rated power SAE J1349, net 132 kW (177 HP) at 2 000 min-1 (rpm)
Maximum torque 673 Nm (69 kgf m) at 1 500 min-1 (rpm)
Piston displacement 5.193 L
Bore and stroke 115 mm x 125 mm
Batteries 2 x 12 V / 88 Ah
HYDRAULIC SYSTEM
Work mode selector Digging mode / Attachment mode
Engine speed sensing system  
Main pumps 2 variable displacement axial piston pumps
Main pumps Maximum oil flow 2 x 224 L/min
Pilot pump 1 gear pump
Pilot pump Maximum oil flow 34 L/min
Hydraulic Motors
Travel 2 variable displacement axial piston motors
Swing 1 axial piston motor
Relief Valve Settings
Implement circuit 34.3 MPa (350 kgf/cm2)
Swing circuit 32.4 MPa (300 kgf/cm2)
Travel circuit 34.3 MPa (350 kgf/cm2)
Pilot circuit 3.9 MPa (40 kgf/cm2)
Power boost 36.3 MPa (370 kgf/cm2)
Hydraulic Cylinders
High-strength piston rods and tubes. Cylinder cushion mechanisms provided in boom and arm cylinders to absorb shock at stroke ends.
Dimensions
Hydraulic Filters
Hydraulic circuits use high-quality hydraulic filters. A suction filter is incorporated in the suction line, and full-flow filters in the return line and swing / travel motor drain lines.
CONTROLS
Pilot controls. Hitachi's original shockless valve.
Implement levers 2
Travel levers with pedals 2
UPPERSTRUCTURE
Revolving Frame
Welded sturdy box construction, using heavy-gauge steel plates for ruggedness. D-section frame for resistance to deformation.
Swing Device
Axial piston motor with planetary reduction gear is bathed in oil. Swing circle is single-row, shear-type ball bearing with induction-hardened internal gear. Internal gear and pinion gear are immersed in lubricant.
Swing parking brake is spring-set/hydraulic-released disc type.
Swing speed 13.5 min-1 (rpm)
Operator's Cab
Independent spacious cab, 1 005 mm wide by 1 675 mm high, conforming to ISO* Standards. Reinforced glass windows on 4 sides for visibility. Front windows (upper and lower) can be opened. Reclining seat with armrests; adjustable with or without control levers.
* International Standardization Organization
UNDERCARRIAGE
Tracks
Tractor-type undercarriage. Welded track frame using selected materials.
Side frame welded to track frame. Lubricated track rollers, idlers, and sprockets with floating seals.
Track shoes with triple grousers made of induction-hardened rolled alloy.
Heat-treated connecting pins with dirt seals. Hydraulic (grease) track adjusters with shock-absorbing recoil springs.
Numbers of Rollers and Shoes on Each Side
Upper rollers 2
Lower rollers 8 : ZX240-3 / ZX250H-3 / ZX250K-3
9 : ZX240LC-3 / ZX250LCH-3 / ZX250LCK-3
Track shoes 47 : ZX240-3 / ZX250H-3 / ZX250K-3
51 : ZX240LC-3 / ZX250LCH-3 / ZX250LCK-3
Track guard 1 : ZX240-3 / ZX240LC-3 / ZX250K-3 / ZX250LCK-3
2 : ZX250H-3 / ZX250LCH-3
Travel Device
Each track driven by 2-speed axial piston motor through planetary reduction gear for counterrotation of the tracks. Sprockets are replaceable.
Parking brake is spring-set/hydraulic-released disc type. Travel shockless relief valve built in travel motor absorbs shocks when stopping travel.
Automatic transmission system: High-Low.
Travel speeds High : 0 to 5.5 km/h
Low : 0 to 3.4 km/h
Maximum traction force 222 kN (22 650 kgf)
Gradeability 70 % (35 degree) continuous
WEIGHTS AND GROUND PRESSURE
ZX240-3:
Equipped with 6.00 m boom, 2.96 m arm and 1.00 m3 bucket (SAE, PCSA heaped).
ZX240LC-3:
Equipped with 6.00 m boom, 2.96 m arm and 1.00 m3 bucket (SAE, PCSA heaped).
ZX250H-3:
Equipped with 6.00 m H-boom, 2.96 m H-arm and 1.00 m3 H-bucket (SAE, PCSA heaped).
ZX250LCH-3:
Equipped with 6.00 m H-boom, 2.96 m H-arm and 1.00 m3 H-bucket (SAE, PCSA heaped).
ZX250K-3:
Equipped with 6.00 m K-boom, 2.96 m K-arm and 1.00 m3 K-bucket (SAE, PCSA heaped).
ZX250LCK-3:
Equipped with 6.00 m K-boom, 2.96 m K-arm and 1.00 m3 K-bucket (SAE, PCSA heaped).
Weight of the basic machines [including 5 400 kg, 6 100 kg H-type, or 6 500 kg K-type counterweight and triple grouser shoes, excluding frontend attachment, fuel, hydraulic oil, engine oil and coolant etc.] are:
ZX240-3 17 800 kg with 600 mm shoes
ZX240LC-3 18 400 kg with 600 mm shoes
ZX250H-3 18 900 kg with 600 mm reinforced shoes
ZX250LCH-3 19 500 kg with 600 mm reinforced shoes
ZX250K-3 19 500 kg with 600 mm reinforced shoes
ZX250LCK-3 20 100 kg with 600 mm reinforced shoes
SERVICE REFILL CAPACITIES
Fuel tank 500.0 L
Engine coolant 26.0 L
Engine oil 23.0 L
Swing device 9.10 L
Travel device (each side) 7.80 L
Hydraulic system 280.0 L
Hydraulic oil tank 243.0 L
BACKHOE ATTACHMENTS
Boom and arms are of welded, box-section design. 6.00 m boom, and 2.50 m, 2.96 m, and 3.61 m arms are available.
Bucket is of welded steel structure. Side clearance adjust mechanism provided on the bucket joint bracket.
Buckets

Harga :
Info Kredit :
Sewa atau Kontrak :
Share this article :

Posting Komentar

 
Support : Mobil | Motor | Sepeda
Copyright © 2011. Alat Berat - All Rights Reserved
Template Modify by Creating Website
Proudly powered by Blogger