Mini Excavators Cat Excavators 300.9D
Specifications
Overview
Caterpillar is pleased to announce the introduction of the 300.9D
sub 3 tonne mini excavator machine.
The 300.9D expands the Cat® Mini Excavator offering. Most notably, the
new 300.9D sub 1 tonne class provides customers with a lower cost unit
for entrance into MHE ownership.
| Digging force – Bucket |
8.9 kN |
| Digging force – Stick |
4.5 kN |
| Operating weight with Safety frame |
985.0 kg |
| Operating weight without Safety frame |
935.0 kg |
Engine
| Engine Model |
Yanmar 31NV70 |
| Net Power |
9.6 kW |
| Rated speed |
2100.0 RPM |
| Battery |
12 V, 20 Amp |
| Diesel tank volume |
10.0 L |
| Displacement |
854.0 cm3 |
| Flywheel output ISO |
9.6 kW |
| Make/type |
Yanmar 31NV70 |
| Maximum engine output |
13.7 kW |
| Type |
Water cooled model 3-cylinder diesel engine |
Weight
| Operating weight with Safety frame |
985.0 kg |
| Operating weight without Safety frame |
935.0 kg |
Weights
| Operating Weight |
935.0 kg |
Dimensions
| Boom swing angle (Left) |
55.0 Degrees |
| Boom swing angle (Right) |
56.0 Degrees |
| Height with ROPS safety frame folded down |
1507.0 mm |
| Height with ROPS safety frame unfolded |
2276.0 mm |
| Length of undercarriage |
1220.0 mm |
| Maximum dig height |
2863.0 mm |
| Maximum digging depth |
1731.0 mm |
| Maximum dozer dig depth |
174.0 mm |
| Maximum dozer lift height |
197.0 mm |
| Maximum dump height |
2035.0 mm |
| Maximum reach |
3074.0 mm |
| Maximum reach at ground level |
3023.0 mm |
| Maximum vertical dig depth |
1349.0 mm |
| Minimum front linkage swing radius |
1150.0 mm |
| Tail swing radius |
736.0 mm |
| Track width |
180.0 mm |
| Transport length (arm lowered) |
2746.0 mm |
| Undercarriage width – Extended |
864.0 mm |
| Undercarriage width – Retracted |
711.0 mm |
| Width |
730.0 mm |
Hydraulic System
| Pumps |
2 gear pumps |
| Discharge capacity |
11.4 + 11.4 L/min (3 + 3 gal/min) |
| Hydraulic tank capacity |
14.0 L |
| Operating pressure for the work and travel hydraulics |
170.0 bar |
| Operating pressure pivot |
70.0 bar |
Chassis and Swivel Gear
| Gradeability |
30°/58% |
| Ground clearance |
127.0 mm |
| Ground pressure |
0.25 kg/cm2 |
| Machine swing speed |
8.0 RPM |
| Number of rollers per side |
2 |
| Track width |
180.0 mm |
| Travel speed |
1.8 km/h |
Operating Specifications
| Machine Overhang |
318.0 mm |
| Stick Length – Standard |
890.0 mm |
Dozer Blade
| Dig depth |
174.0 mm |
| Height |
200.0 mm |
| Lift height |
197.0 mm |
| Width |
700.0 mm |
Noise Emissions
| Sound power level (LWA) (to 2000/14/EG) |
93.0 dB(A) |
Benefits & Features
Compact Dimensions
Easy site access
Compact Dimensions
With an overall width of only 730 mm (2 ft 5 in) the
Cat® 300.9D can easily drive through narrow passages and doors. Both
indoor and outdoor jobs are now accessible with the under 1000 kg (2,205
lb) weight making easy trailer transportation between sites possible.
Extending Undercarriage and Blade
An extending undercarriage and fold out dozer blade
allow the machine to be configured for excellent working stability and
optimum performance. Easy retraction, controlled from the operator’s
seat, enables the machine to pass through narrow openings.
Foldable Safety Frame
A protective ROPS safety frame structure mounted on
the front of the machine allows fitting of a guard for extra operator
protection during hammer use. The structure folds down in a few seconds
for easy machine transportation and storage.
Performance and Durability
Powerful performance, Robust construction, Work tool ready
Powerful Engine and Hydraulics
The 13.7 kW (18 hp) engine and perfectly matched
hydraulics provide efficient, economical and reliable performance for
the toughest of jobs. The matched cooling system is designed to
accommodate working within confined areas and also the powerful Cat®
hammer.
Low noise and vibration levels deliver comfortable operation.
Hose and Cylinder Protection
Bucket hoses are well protected within the boom and
the cylinder is mounted above the structure to increase the machines
durability for working in tough environments. The clean lines of the
front linkage also provide excellent visibility to the digging area.
Auxiliary Hydraulics as Standard
The 300.9D is fitted with auxiliary lines for hammer
operation routed down to the stick. Locating the connecting point close
to the work tool reduces connecting hose lengths and potential for
damage.
User Friendly Operation
Simple controls – Easily maintained
Simple Controls (Ease of Use)
The operator area is spacious and laid out to provide
comfort and ease of operation. Smooth, precision operation of functions
is possible from independent controls allowing all skill levels to be
productive with little practice.
Extending Dozer Blade
Blade extensions simply rotate and lock into position
allowing the machine to be quickly configured for narrow width or
maximum blade coverage.
Locking pins and extension plates are retained with the machine to
reduce potential for lost or damaged components.
Serviceability
Service and maintenance time is reduced to a minimum
with a simple to open steel engine cover and all maintenance and
greasing points easily accessible.
Customer Support
Low operating costs with excellent services and options
Customer Support
Product supported through the Cat dealer and worldwide parts network aimed at minimizing downtime.
- Finance options
- Warranty options
- Maintenance contracts
- Help and advice in product and option selection to maximize efficiency and operating profitability
Work Tools
A range of tools is available to take advantage of
the machines versatility. All tools are matched to the machine to
optimize performance and deliver excellent value through high
productivity and long life.
Harga :
Info Kredit :
Sewa atau Kontrak :
Posting Komentar