Messersi Excavators M-13K

 The Miniexcavator M-13, latest of Messersì product, is at the top of the sector thanks to its technological innovations. Great attention has been given to its weight, which has been limited to permit its transport on vehicles with total weight on ground (full loaded) of 3.5 tons. and also on small trailers.
• Engine complies to the norm 97/68/EC Stage 2 relevant to polluting emissions.
• Original design, with reduced slew radius (only 650 mm ) and total protection of the engine bonnet, so that this machine can be classified as a SR miniexcavator (Short Radius)
• The cushioned and adjustable seat gives an excellent ergonomic conditions for the operator.
• A lock is fitted to all the pilot assisted controls and levers when the armrest is lifted, to prevent any accidental movements giving exceptional safety.
• Optimum controllability is achieved using pilot assisted controls on joy-sticks to operate arms and bucket.
• A particular care has also been given to design, maintenance operations and safety of the operator.
• Its round shaped design recalls the other models of the range, thus creating a continuity of style and image, and giving a strong identity to all our Miniexcavators.

Standard Equipment

• Canopy (FOPS, TOPS Standards)
• Bucket of mm 300 (SAE capacity lt. 25)
• USE & MAINTENANCE and SPARE PARTS MANUAL

Optional Equipment

• Buckets of mm 250, 350, 450, 500, standard, for rocks and for Quick Hitches
• Bucket for slopes fixed or swivelling
• Slopes cleaning buckets
• Mechanical or hydraulic quick hitch
• Hydraulic breaker
• Manual hydraulic breaker
• Hydraulic drill
Data, features and illustrations are not binding and may be altered without any notice.

Engine

Make and model		Kubota D902
Max. power at 3200 rpm (DIN 6271)	HP/Kw	20.4/15
Rated power at 2400 rpm	HP/Kw	19/14
Cylinders	N°	3
Displacement	cm³	898
Cooling		water
Battery	N°	1 – 12 V – 44 Ah

Hydraulic System

Hydrostatic transmission with orbital motors and planetary reduction gears with negative brakes
Travelling counter-balance valves
N. 2 gear pumps	Lt/min	15 x 2
Total delivery	Lt/min	30
Auxiliary hydraulic flow for P.T.O.	Lt/min	30
Max. working pressure	bar	170
Slew speed (with orbit motor)	g/min	9.5
Boom, arm, bucket and slew actuated by servo-controlled joysticks
Mechanical levers to control tracks, pedals to control boom swing and single and double effect P.T.O.
Lever to control refilling blade
Heat exchanger for oil cooling

Undercarriage

Box section steel frame
Track type and width	mm	rubber 200
Track bearing rollers	N°	3+3 low/guide block
Track tensioning		adjusting screw
Refilling blade	mm	250 x 990

Performances

Shipping weight	Kg	1350
Operating weight	Kg	1420
Break-out force	daN	1200
Digging force	daN	800
Travel speed	Km/h	1.8
Max. gradient capacity	more than %	100
Specific ground pressure	Kg/cm²	0.285

Refuelling

Fuel tank capacity	lt	20
Hydraulic oil tank capacity	lt	19

Harga :
Info Kredit :
Sewa atau Kontrak :