• Engine complies to the norm 97/68/EC Stage2 relevant to the polluting emissions.
• Straight travel circuit, electrically engaged, for simultaneous operation of travel and front digging attachment.
• Two track speed via axial piston motors with two different displacements to increase travelling speed.
• Extraordinary manoeuvrability due to the employment, on all functions, of pilot assisted controls (except for the refilling blade and for the boom swinging).
• A particular care has also been given to the design, to the maintenance operations and to the safety of the operator.
• Its round shaped design recalls the other models of the range, thus creating a continuity of style and image, and giving a strong personalization to all our Miniexcavators.
• Lock of ALL the pilot assisted controls and of the levers when the armrest is lifted, thus excluding the danger of any undesired and uncontrolled movement caused by the accidental push of the control levers and pedals, when getting on and off the machine.
• The regenerative circuit of the excavating arm cylinder permits to increase the retraction speed of the same arm of approx. 50%.
Standard equipment
• Bucket of 400 mm (SAE capacity l.60)
• Canopy (FOPS, TOPS Norms)
• Electrically operated second travelling speed
• mm 1.000 dipper stick
• Regenerative valve on dipper stick
• USE & MAINTENANCE and SPARE PARTS MANUALS
• Canopy (FOPS, TOPS Norms)
• Electrically operated second travelling speed
• mm 1.000 dipper stick
• Regenerative valve on dipper stick
• USE & MAINTENANCE and SPARE PARTS MANUALS
Optional equipment
• Bucket of mm 250, 300, 350, 450, 500, standard, for rocks and for Quick Hitches; bucket for slopes fixed or orientable; slopes cleaning buckets; mechanical or hydraulic quick hitch
• Hydraulic breaker
• Hydraulic manual breaker
• Grass-bush cutter
• Hydraulic drill
• Closed cab with heating system (FOPS TOPS norms)
• Digging arm of mm 1.200
• Steel trucks
Data, features and illustration are not binding and may be altered without any notice.
• Hydraulic breaker
• Hydraulic manual breaker
• Grass-bush cutter
• Hydraulic drill
• Closed cab with heating system (FOPS TOPS norms)
• Digging arm of mm 1.200
• Steel trucks
Data, features and illustration are not binding and may be altered without any notice.
Engine
| Make and model | Kubota D1105 | |
| Installed power at 2500 rpm (DIN 6271) | HP/Kw | 23.7 / 17.5 |
| Cylinders | N° | 3 |
| Displacement | cm³ | 1123 |
| Cooling | water | |
| Battery | N° | 1 – 12V – 60Ah |
Hydraulic system
| Hydrostatic transmission with axial piston motors and planetary drives with negative control brakes. Travel counter – balance valves | ||
| Main axial pistons pump with variable displacement | lt/min | 21.8 x 2 |
| Secondary gear pump | lt/min | 15.5 x 1 |
| Total delivery | lt/min | 59.1 |
| Auxiliary hydraulic flow for P.T.O. | lt/min | 37.3 |
| Max working pressure | bar | 230 / 200 |
| Turret rotation speed (with hydraulic motor and negative control brake) | g/min | 10 |
| Hydraulic joy-stick to move bucket and arms and slew the upper frame | ||
| Hydraulic pilot assisted pedal to operate power take off with double and single effect | ||
| Lever to control dozer blade and tracks | ||
| Pedal control to operate boom swing | ||
| Heat exchanger for hydraulic oil cooling |
Undercarriage
| Steel frame of box section type | ||
| Type and width of tracks | mm | rubber 250 |
| Track’s bearing rollers | N° | 4+4 low + guide block |
| Track tensioning | with grease | |
| Refilling blade | mm | 240 x 1460 |
Performances
| Operating weight (with canopy) | Kg | 2100 |
| Break out force | daN | 1850 |
| Digging force (arm mm 1.000 / 1.200 length) | daN | 1410 / 1235 |
| Travel speed I/II | Km/h | 2.2 / 4.0 |
| Max gradient capability | more than % | 100 |
| Specific ground pressure | Kg/cm² | 0.289 |
Refuelling
| Fuel tank capacity | lt | 30 |
| Hydraulic oil tank capacity | lt | 28 |
Harga :
Info Kredit :
Sewa atau Kontrak :
Posting Komentar