Komatsu Excavators PC138US-10

The Komatsu PC138US-10 hydraulic excavator was designed with an ultra-short tail swing to meet the challenges of work in confined areas. With a near-zero tail swing radius, whilst also being very stable, it is the ultimate machine for job site safety and is perfect for work on roadways, bridges, in urban areas, or anywhere with limited work space. Built around the EU Stage IIIB engine platform, the PC138US-10 delivers the quality, performance and productivity you can expect from Komatsu equipment. This machine is also offered with complimentary Komatsu maintenance for three years (or 2,000 working hours, whichever comes sooner)

Harga :
Info Kredit :
Sewa atau Kontrak :

Komatsu Excavators PC1250LC-8 MH

Komatsu Excavators PC1250LC-8 MH. If you have a material handling application that needs high lift and plenty of lifting power, the PC1250LC-8 MH requires a closer look. An elevated cab, with tiltable structure for service access, and up to a 70’ two piece front give the PC1250LC-8 MH tremendous operating range.

Harga :
Info Kredit :
Sewa atau Kontrak :

Komatsu Excavators C800LC-8 MH

Komatsu Excavators C800LC-8 MH. If your job calls for a grapple, clam or magnet with a long reach, the PC800LC-8 material handler can provide the right arm and boom combinations you’ll need

Harga :
Info Kredit :
Sewa atau Kontrak :

Komatsu Excavators PC650LC-8 MH

Komatsu Excavators PC650LC-8 MH. If your needs require long reach and high stability in an excavator to handle material with grapples, clams or magnets, the PC650LC-8 material handler has the boom and arm combinations you’ll need.

Harga :
Info Kredit :
Sewa atau Kontrak :

Komatsu Excavators PC490LC-10 MH

Komatsu Excavators PC490LC-10 MH. If your needs require long reach and high stability in an excavator to handle material with grapples, clams or magnets, the PC490LC-10 material handler has the boom and arm combinations you’ll need.

Harga :
Info Kredit :
Sewa atau Kontrak :

Komatsu Excavators PC300-7

Komatsu Excavators PC300-7

Specifications PC300-7	Numbers
Flywheel Horsepower (kW/HP) (SAE)	180/242
Bucket capacity (m3) (SAE)	0.52-1.80
Operating Weight (kg)	30800
Max digging depth (mm)	7380
Max digging reach (mm)	10920

Daftar Harga :
Info Kredit :
Lokasi Penjualan/ Distributor :

Komatsu Excavators PC4000

Komatsu Excavators PC4000

The integrated engine oil and filter system combining the oil stabilizing systems, Reserve and Centinel, with Eliminator oil filter extends the oil change interval up to 4000 hours based on oil analysis. The high capacity Mesabi engine radiators are cooled by a hydraulically driven fan for superior cooling efficiency.

Model		Komatsu SDA16V160E-2 Tier 2
Type		Water-cooled, 4-cycle, direct injection
Aspiration		Turbocharged and aftercooled
Number of cylinders		16
Rated power (SAE 1995/J1349) @ 1800 rpm	1,875 HP	1400 kW
Governor		All-speed, electronic

The power train consists of one main drive. One gearbox drives four identical pumps which draw hydraulic oil from an unpressurized hydraulic tank. Open circuit hydraulics provide maximum cooling and filtering efficiency.

The four-circuit system features a load-limiting governor with oil delivery summation to the working circuits and incorporates pressure cut-off control. Hydropilot prioritizes hydraulic flow giving smooth hydraulic response, simple hydraulic system layout, and a reduced number of components. The hydraulic system includes large swing-out vertical air-to-oil hydraulic coolers with temperature regulated hydraulically driven fans.

Rated flow (total output)	1,096 U.S. gpm	4140 ltr/min
Relief valve setting	4,495 psi	310 bar
Swing flow rate	420 U.S. gpm	1590 ltr/min
High pressure in line filters one per pump located at the valve blocks		200 microns
Full flow return line filters (5 double) at head of hydraulic tank		10 microns
Case drain return line filters (one double element)		3 microns

Travel control		2 foot pedals
Gradeability		Up to 50%
Travel speed (maximum)	1.3 mph	2.1 km/h
Service brake		Hydraulic brake
Parking brake		Wet multiple-disc brake

Hydraulic motors and drives		2
Swing brake, service		Hydraulic
Swing brake, parking		Wet multiple-disc
Swing ring teeth		External
Swing speed (maximum)		4.0 rpm

Undercarriage consists of one center carbody and two track frames, each side attached by high torque bolts.

Center frame		H-type
Track frame		Steel box-section

Track adjustment		Automatic hydraulic type
Number of track shoes (each side)		49
Number of top rollers (each side)		3
Number of bottom rollers (each side)		7

System		24 V
Batteries (series/parallel)		2 x 3 x 12 V
Alternator		260 A
Standard working lights		14 Xenon lights
Standard service lights		throughout platform

System		24 V
Batteries (series/parallel)		2 x 2 x 12 V
Standard working lights		14 Xenon lights
Standard service lights		throughout platform

Type		Squirrel-cage induction motor
Power output		1350 kW
Voltage		6,000 – 7,200 V*
Amperage (approximate)		145 A – 120 A
Start-up		Soft start
Frequency standard		60 Hz @ 1800 rpm
Frequency option		50 Hz @ 1500 rpm
*Other voltages available on request.

Two hydraulically powered Lincoln single line automatic lubrication systems are provided as standard, complete with time and volume variable controls. The central lube grease system is supplied from a refillable 200 liter 53 gal barrel. A second, identical system supplies open gear lubricant to the swing ring teeth through a lube pinion. Replenishment of the containers is through the Wiggins connections on the service arm.

Hydraulic oil tank	1,030 U.S. gal	3900 ltr
Hydraulic system	1,559 U.S. gal	5900 ltr
Fuel	1,691 U.S. gal	6400 ltr
Engine coolant	125 U.S. gal	475 ltr
Engine oil	77 U.S. gal	290 ltr
Centinel engine oil make up tank	122 U.S. gal	460 ltr

The large and comfortable cab is mounted on 18 viscous damping pads and sound insulated. The cab has an automatic climate control and is pressurized. The operator's seat is air suspended, electrically heated and has a lap seat belt and offers multiple adjustments. The trainer seat is also equipped with a lap seat belt. Low-effort joystick controls are electric over hydraulic with foot controls for front shovel clam, crawler and swing brake. Full instrumentation, KOMTRAX Plus and an AM/FM radio with MP3 ready CD player is fitted. The windshield wash wiper has two speeds and intermittent operation. Amenities include a refrigerator and storage cabinets. Powered and heated mirrors are adjusted from inside the cab. External metal sun blinds on the cab side window and internal roller blinds on all windows are standard. The left hand window is an emergency exit. All windows are tinted parsol green.

Cab engineering standards are:
• ISO 3449 Falling Objects Protection Structure (FOPS Level II)
• ISO 6396 Noise in operator’s cab is 75 dB(A)
• ISO 2631-1 Whole body vibration and shock below 0.5 m/s²
• ISO 5349-1 Hand-lever vibration lower 2.5 m/s²
• ISO 10263-4 Heating and air conditioning second heater and air conditioner as option

KOMTRAX Plus is designed for Komatsu mining equipment to provide real time information about the operating status of the machine via a colored display. The integrated digital storage provides a full event history and trend data, which can be downloaded by laptop, optional are W-LAN or satellite modem.

PC4000 Backhoe: Operating weight including 9750 mm / 32'0" boom, 4500 mm / 14'9" stick, 22 m³ / 29.0 yd³ backhoe bucket, operator, lubricant, coolant, 1/3 fuel and standard equipment.

Shoe Width:	Operating Weight:	Ground Pressure:
47'' / 1200 mm backhoe	869,200 lb / 394 t	31.3 psi / 21.6 N/cm²
59'' / 1500 mm backhoe	879,800 lb / 399 t	25.4 psi / 17.5 N/cm²

Quality
■ Quality management ISO 9001
■ Environmental Management ISO 14001
■ High consistent quality through continuous investment in personnel, design and manufacturing systems and processes

Reliability and Durability
■ Robust structural design developed from field experience and finite element analysis

Undercarriage
■ Big diameter rollers, idlers and sprockets
■ Large surface area and extensive precision hardening reduce track wear
■ Hardened track link pin bores

Productivity
■ Powerful digging forces
■ Ease of bucket filling
■ Proven bucket design
■ All cylinders mounted in the shadow of the attachment for protection
■ Buckets and wear packages to suit all material densities and properties

Advanced Hydraulics
■ Precise control
■ Comprehensive monitored filtration
■ Simple open circuit hydraulic system with high efficiency swing out oil coolers

Large Comfortable Cab
■ Gives full shift comfort
■ Komatsu low noise cab on multiple viscous mounts for reduced noise and vibration
■ Large volume cab with large scale front window
■ Comprehensive climate control with pressurized filtered air ventilation and air conditioning
■ High specification multi-adjustable air suspension seat
■ Well elevated operator position giving good all round view

Powerful Diesel Engine
■ Komatsu SDA16V160E-2 engine Tier 2 certified, Rated 1400 kW / 1875 HP at 1800 rpm
■ Electronic engine management
■ Low engine emission levels meet EPA regulations
■ Time saving Engine Oil Management System; Centinel, Engine Reserve Oil Supply and Eliminator Oil Filter system

Easy Maintenance
■ Simple, common-sense design provides easy access to all major components
■ Generous access to all major service points from machinery house floor level
■ Enclosed, walk-in machinery house with partition wall separating engine from pump area
■ Automatic central lubrication
■ KOMTRAX Plus electronic monitoring system providing real time information about the operating status of the machine
■ Ground-level access to hydraulically powered swing down service arm with Wiggins connections

KOMTRAX^® equipped machines can send location, SMR and operation maps to a secure website utilizing wireless technology. Machines also relay error codes, cautions, maintenance items, fuel levels, and much more.

Harga :
Info Kredit :
Sewa atau Kontrak :

Komatsu Excavators PC8000-6

Komatsu Excavators PC8000-6

The integrated engine oil and filter system extends service intervals. This combines the oil stabilizing systems Reserve and Centinel with the Eliminator self cleaning oil filter to extend (with oil analysis) the oil change interval to 4000 hours.

The high capacity engine radiators are each cooled by a hydraulically driven fan for superior cooling efficiency.

Model		2 x Komatsu SDA16V160
Type		4-cycle, water-cooled, direct injection
Aspiration		Turbocharged and aftercooled
Number of cylinders		16
Rated power @ 1800 rpm (SAE 1995/J1349)	2 x 2,010 HP	2 x 1500 kW
Governor		All-speed, electronic

System		24 V
Batteries (series/parallel)		8 x 12 V
Alternator		2 x 100 A
Standard working lights		8 Xenon lights
Standard service lights		15 lights
Optional lighting upon request

The undercarriage consists of one center carbody and two track frames, each attached by four large diameter hardened pins.

Center frame		H-type
Track frame		Steel box-section
Track adjustment		Automatic hydraulic type
Number of track shoes		48 each side
Number of top rollers		3 each side
Number of bottom rollers		8 each side

Travel control		2 foot pedals
Gradeability		Up to 50%
Travel speed (maximum)	1.4 mph	2.2 km/h
Service brake		Hydraulic
Parking brake		Wet, multiple-disc

Hydraulic motors and drives		3
Swing brake, service		Hydraulic
Swing brake, parking		Wet, multiple-disc
Swing ring teeth		External
Swing speed (maximum)		2.7 rpm

Type		2 x Squirrel-cage induction motors
Power output		2 x 1450 kW
Voltage		6600 V*
Amperage (approximate)		2 x 155 A
Frequency (standard) @ 1500 rpm		50 Hz
Optional frequency @ 1800 rpm		60 Hz
*Other voltages available on request.

System		24 V
Batteries (series/parallel)		4 x 12 V
Standard working lights		8 Xenon lights
Standard service lights		15 lights
Optional lighting upon request

The power train consists of two main drives. Diesel engines or electric motors can be supplied. Each of the two gearboxes drives four identical pumps which draw hydraulic oil from an unpressurized hydraulic tank. Open circuit hydraulics provide maximum cooling and filtering efficiency.

The four-circuit system features a load-limiting governor with oil delivery summation to the working circuits and incorporates pressure cut-off control. Hydropilot prioritizes hydraulic flow giving smooth hydraulic response, simple hydraulic system layout, and a reduced number of components. The hydraulic system includes six large swing-out vertical air-to-oil hydraulic coolers with temperatureregulated hydraulically driven fans.

Rated flow (total output)	2,190 gpm	8280 ltr/min
Relief valve setting	4,495 psi	310 bar
Swing flow rate	547 gpm	2070 ltr/min
High pressure in line filters (one per pump located at the valve blocks)		200 µm
Full flow return line filters (8 double elements) (at head of hydraulic tank)		10 µm
Case drain/by-pass return line filters		3 microns

Two hydraulically powered Lincoln Single Line automatic lubrication systems are provided as standard, complete with time and volume variable controls. Activity and malfunction events are linked to the Electronic Control System (ECS). The central lubrication and open gear lubricant are supplied by identical pump assemblies from a refillable twin container which has a capacity of 2 x 300 liters (2 x 80 gal.). Replenishment of the containers is through the Wiggins connections in the service center.

Hydraulic oil tank	2,205 U.S. gal	8350 ltr
Hydraulic system	3,040 U.S. gal	11500 ltr
Fuel	3,564 U.S. gal	13500 ltr
Engine coolant	2 x 125 U.S. gal	2 x 475 ltr
Engine oil	2 x 77 U.S. gal	.2 x 290 ltr
Centinel engine oil make up tank	2 x 180 U.S. gal	2 x 670 ltr

The large welded steel cab is mounted with 18 viscous damping pads and sound insulated.

It is equipped with automatic climate control and is pressurized. The operator’s seat is fully adjustable, air suspended, electrically heated and has a lap seat belt. Fold-away trainer’s seat.

Low effort joystick controls are electric over hydraulic and foot controls are for front shovel clam, crawler and swing brake.

Full instrumentation and Electronic Control System (ECS) are provided. Space in the console is provided for an additional monitor. AM/FM radio is included. The dual windshield wipers have two-speed and intermittent operation (water reservoir 7 liters 1.8 gal.). Amenities include a wash basin with running water, water reservoir (50 liters 13 gal.), refrigerator, and storage cabinets. Powered mirrors are adjustable from inside the cab.

There are left and right-hand sliding windows. All windows are tinted parsol green. External metal louvers are provided on the cab side windows.
Cab engineering standards are:
• ISO 3449 Falling Objects Protection Structure (FOPS) Level 2
• ISO 6396 Noise in operator´s cab is 76dB(A)
• ISO 2631-1/5349-1 Vibration and Shock
• Air conditioner	34120 Btu	10 kW
• Heater/Defroster (Diesel version)	34120 Btu	10 kW
• Heater/Defroster (Electric version)	40,940 Btu/hr	12 kW

The Electronic Control System (ECS) digital diagnostic system, mounted in the operator‘s console, provides a text display of realtime and stored information about the operating systems of the machine. Non-serious and critical faults are immediately announced, and for major malfunctions the engines are also shut down. The integrated digital storage provides full event history, which can be downloaded with a laptop computer. The ability to electronically record service events provides precise service information to assist in reducing downtime.

Komatsu Technology and Expertise
• Quality management ISO 9001 certified
• Environmental Management ISO 14001 certified
• High, consistent quality through continuous investment in personnel, design and manufacturing systems and processes

Advanced Hydraulics
Extended reliability and control
• Comprehensive monitored filtration
• Simple open-circuit hydraulic system with high efficiency swing-out oil coolers

Reliability and Durability
Designed for lower operating costs
• Robust structural design developed from field experience and finite element analysis
• Extended life undercarriage wear parts
• Large diameter rollers, idlers and sprockets
• Large surface contact area with extensive precision hardening reduces wear
• Hardened track link pin bores

Productivity
Designed for more tons per hour
• Powerful digging forces
• Easy bucket filling
• Proven attachment design
• All cylinders mounted under the shovel attachment for additional protection
• Buckets and Wear Packages to suit all material densities and ground conditions

Powerful Diesel Engines
Two Komatsu SDA16V160 engines
• Rated (each) 1500 kW 2010 HP, at 1800 rpm
• Electronic engine management
• Low engine emission levels – meets EPA Tier 2 emission regulations
• Time saving oil management system as standard equipment; Centinel Engine Oil Management, Engine Reserve Oil Supply and Eliminator Oil Filter systems

Large Comfortable Cab
Provides full shift comfort
• Komatsu low noise cab on multiple viscous mounts for reduced noise and vibration
• Large volume cab with full view front window (floor to ceiling) increases operator view
• Comprehensive climate control with pressurized, filtered air ventilation and air conditioning
• High specification multi-adjustable air suspension seat, redesigned for mining
• Well elevated operator position provides superior all around view

Easy Maintenance
Simple, common-sense design gives quick, easy access to all major components
• Hydraulically operated ground access ladder
• Generous access to all major service points from machinery house floor level
• Enclosed, internally lit machinery house with wall separating engine from pump area
• Automatic central lubrication
• Electronic Control System (ECS) provides real-time information from the operating systems of the machine
• Ground-level access to hydraulically powered dropdown service center with Wiggins connections

Daftar Harga :
Info Kredit :
Lokasi Penjualan/ Distributor :

Komatsu Excavators PC26MR-3

Komatsu PC26MR-3 Mini Excavator
The new PC26MR-3 compact mini-excavator is the result of the competence and technology that Komatsu has acquired over the past 80 years. It was designed and developed with  constant attention to the needs of customers from all over the world. The end product is a user-friendly machine with top-class performances.

KEY SPECIFICATIONS
Engine Power: 15,7kW/21,1 HP @2.500rpm
Operating Weight: 2.250 - 2.550 kg
Bucket Capacity: 2.550 - 2.800 kg

OUTSTANDING PERFORMANCES
• Optimal power and digging speed
• Superior stability and safety in any conditions
• Automatic down-shift

EASY MAINTENANCE
• Quick access to all daily inspection points
• Tilting cab for maintenance jobs
• Extended 500-hour service interval

CUTTING-EDGE HYDRAULIC CIRCUIT
• CLSS (Closed-centre Load Sensing System)
• Perfect control even during combined operations
• Fast and precise movements

TOTAL VERSATILITY
• Customised configurations
• Standard 1 or 2 way auxiliary line for attachments
• Ideal for a wide range of applications

FIRST-CLASS OPERATOR COMFORT
• Wide entrance for easy entry and exit
• Spacious working environment
• Pressure Proportional Control (PPC) servo-controls

KOMTRAX SATELLITE MONITORING SYSTEM
Monitor your investment closely at all times with Komtrax, a machine monitoring and tracking system exclusive to Komatsu. 24 hour access to reports to show your machine's productivity, location and health.

Komatsu Excavators PC22MR-3

Komatsu PC22MR-3 Mini Excavator
The new PC22MR-3 compact mini-excavator is the result of the competence and technology that Komatsu has acquired over the past 80 years. It was designed and developed with constant attention to the needs of customers from all over the world. The end product is a user-friendly machine with top-class performances.

KEY SPECIFICATIONS
Engine Power: 15,7kW/21,1 HP @2.500rpm
Operating Weight: 2.250 - 2.550 kg
Bucket Capacity: 0,035 - 0,085m³

OUTSTANDING PERFORMANCES
• Optimal power and digging speed
• Superior stability and safety in any conditions
• Automatic down-shift

FIRST-CLASS OPERATOR COMFORT
• Wide entrance for easy entry and exit
• Standard 1 or 2 way auxiliary line for attachments
• Ideal for a wide range of applications

CUTTING-EDGE HYDRAULIC CIRCUIT
• CLSS (Closed-centre Load Sensing System)
• Perfect control even during combined operations
• Fast and precise movements

TOTAL VERSATILITY
• Customised configurations
• Standard 1 or 2 way auxiliary line for attachments
• Ideal for a wide range of applications

EASY MAINTENANCE
• Quick access to all daily inspection points
• Tilting cab for maintenance jobs
• Extended 500-hour service interval

KOMTRAX SATELLITE MONITORING SYSTEM
Monitor your investment closely at all times with Komtrax, a machine monitoring and tracking system exclusive to Komatsu. 24 hour access to reports to show your machine's productivity, location and health.

Komatsu Excavators PC16R-3

Komatsu PC16R-3 Mini Excavator

The new PC16R-3 compact mini-excavator is the product of the competence and technology that Komatsu has acquired over 80 years. It was developed with constant attention to the needs of customers from all over the world. The end result is a user-friendly machine that offers top-class performance.

KEY SPECIFICATIONS
Engine Power: 11,6 kW/15,6HP @2.600 rpm
Operating Weight: 1.570 - 1.920 kg
Bucket Capacity: 0,03 - 0,06 m³

OUTSTANDING PERFORMANCE
• Optimal power and digging speed in confined spaces
• Perfect control even during combined operations
• Fast and precise movements

COMPLETE VERSATILITY
• Standard 1- or 2-way auxiliary line for attachments
• Numerous configurations available
• Ideal for a wide range of applications

EASY SERVICEABILITY
• Easy access to all daily inspection points
• Tilting canopy/cab provides access for larger maintenance jobs
• Extended 500-hour service interval

EXTREMELY ROBUST
• Excellent stability and safety for maximum operator confidence in any conditions
• High quality standards guarantee longer life-time for all components
• ROPS and FOPS compliant canopy/cab

HIGHEST OPERATOR COMFORT
• Spacious working environment ensures outstanding comfort
• Excellent accessibility to and from the machine
• Pressure Proportional Control (PPC) servo-controls

Komatsu Excavators PC14R-3

Komatsu PC14R-3 Mini Excavator

The new PC14R-3 compact mini-excavator is the product of the competence and technology that Komatsu has acquired over 80 years. It was developed with constant attention to the needs of customers from all over the world. The end result is a user-friendly machine that offers top-class performance.

KEY SPECIFICATIONS
Engine Power: 11,6kW/15,6HP @2.600 rpm
Operating Weight: 1.440 - 1.800 kg
Bucket Capacity: 0,03 - 0,06m³

OUTSTANDING PERFORMANCE
• Optimal power and digging speed in confined spaces
• Perfect control even during combined operations
• Fast and precise movements

COMPLETE VERSATILITY
• Standard 1- or 2-way auxiliary line for attachments
• Numerous configurations available
• Ideal for a wide range of applications

EASY SERVICEABILITY
• Easy access to all daily inspection points
• Tilting canopy/cab provides access for larger maintenance jobs
• Extended 500-hour service interval

EXTREMELY ROBUST
• Excellent stability and safety for maximum operator confidence in any conditions
• High quality standards guarantee longer life-time for all components
• ROPS and FOPS compliant canopy/cab

HIGHEST OPERATOR COMFORT
• Spacious working environment ensures outstanding comfort
• Excellent accessibility to and from the machine
• Pressure Proportional Control (PPC) servo-controls

Komatsu Excavators PC228USLC-10

Komatsu Excavators PC228USLC-10
Specifications
Engine

Model		Komatsu SAA6D107E-2*
Type		Water-cooled, 4-cycle, direct injection
Aspiration		Turbocharged and air-to-air aftercooled
Number of cylinders		6
Bore	4.21"	107 mm
Stroke	4.88"	124 mm
Piston displacement	408 in³	6.69 ltr
Horsepower:
SAE J1995 / Gross	165 HP	123 kW
ISO 9249 / SAE J1349 / Net	158 HP	Net 116 kW
Rated rpm		2000
Governor		All-speed control, electronic
Lubrication system:
Method		Gear pump, force-lubrication
Filter		Full-flow
Air cleaner		Air cleaner, double element and auto dust evacuator
*EPA Tier 4 Interim and EU stage 3B emissions certified

Hydraulic System

Type		HydrauMind (Hydraulic Mechanical Intelligence) system, closed-center system with load sensing valve and pressure compensated valve
Main pump
Type		Variable-capacity piston pump.
Pumps for		Boom, arm, bucket, swing, and travel circuits.
Maximum flow	125.5 gal/min	475 ltr/min
Hydraulic motors:
Travel		2 x axial piston motor with parking brake
Swing		1 x axial piston motor with swing holding brake
Relief valve setting:
Travel circuits	5,400 psi	37.3 MPa 380 kgf/cm²
Pilot circuit	470 psi	3.2 MPa 33 kgf/cm²
Implement circuits	5,400 psi	37.3 MPa 380 kgf/cm²
Swing circuits	4,264 psi	29.4 MPa 299 kgf/cm²
Hydraulic cylinders:
(Number of cylinders – bore x stroke x rod diameter)
Boom / 2	4.7" x 54.5" x 3.3"	120 mm x 1385 mm x 85 mm
Arm / 1	5.3" x 58.7" x 3.7"	135 mm x 1490 mm x 95 mm
Bucket / 1	4.5" x 44.1" x 3.2"	115 mm x 1120 mm x 80 mm

Drives and Brakes

Steering control		Two-lever with pedals
Drive method		Fully hydrostatic
Maximum drawbar pull	45,410 lb	202 kN 20600 kgf
Maximum travel speed:
High	3.4 mph	5.5 km/h
Mid	2.5 mph	4.1 km/h
Low	1.9 mph	3.0 km/h
Parking brake		Mechanical disc brake

Swing System

Driven by		Hydraulic motor
Swing reduction		Planetary gear
Swing circle lubrication		Grease-bathed
Swing lock		Mechanical disc brake
Swing speed		11.0 rpm
Swing torque	48,124 ft lbs	6656 kg.m

Undercarriage

Center frame		X-frame leg
Track frame		Box-section
Track type		Sealed
Track adjuster		Hydraulic
Number of shoes (each side):		49
Number of carrier rollers (each side):		2
Number of track rollers (each side):		9

Coolant & Lubricant Capacity (refilling)

Fuel tank	82 U.S. gal	310 ltr
Radiator	7.9 U.S. gal	30 ltr
Engine	6.1 U.S. gal	23.1 ltr
Final drive, each side	1.4 U.S. gal	5.0 ltr
Swing drive	1.7 U.S. gal	6.5 ltr
Hydraulic tank	33.3 u.s. gal	126 ltr

Operating Weight (APROXIMATE)

Operating weight including 5700 mm / 18'8" one-piece boom, 2925 mm / 9'7" arm, SAE heaped 0.80 m³ / 1.05 yd³ backhoe bucket, operator, lubricant, coolant, full fuel tank, and the standard equipment.

Shoes	Operating Weight	Ground Pressure
600 mm 24"	24130 kg 53,195 lb	0.51 kg/cm² 7.28 psi
700 mm 28"	24395 kg 53,785 lb	0.44 kg/cm² 6.21 psi
800 mm 31.5"	24675 kg 54,405 lb	0.39 kg/cm² 5.62 psi

Features
Harga :
Info Kredit :
Sewa atau Kontrak :