Blastcrete D3522-MP

The D3522 Mixer/Pump is composed of our D3522 2-inch hydraulic squeeze pump with infinitely variable speed from 0-6 cubic yards per hour, 9 cu. ft. capacity hydraulic spiral mixer with hydraulic dump, hydraulic agitator in the receiving hopper, and mounted on a high speed single axle trailer with lights and electric braking package. The D3522 Mixer/Pump's primary wear part is the rubber pumping tube that can be replaced in 20 minutes.

Features

• 9 cu.ft. Hydraulic Spiral Mixer with Hydraulic Dump and Clean Out Door
• 12 cu.ft. Receiving Hopper with Agitator and Clean Out Door
• Reliable 29 HP Kubota Water Cooled Diesel
• Simple 2" Hydraulic Squeeze Pump Drive by Heavy Duty Planetary Gearbox
• Lowest Cost Pump to Purchase, Own and Operate
• Longest Lasting Pumping Tubes in the Industry

Power Options

• Kubota V1505 29 HP Water Cooled Diesel
• 20 HP Electric Motor with Starter and Disconnect

Options

• Pendant or Wireless Remote
• 150 gallon Water Tank with 2" Flow Meter
• Spare Tire Mounted
• Hydraulic Pressure Washer
• Dual Axles
• Air Compressor Mounted

Specifications

• Length — 204"
• Width — 88"
• Height of water tank — 89"
• Height Mixer/dump position — 86"
• Charging height — 48"
• Output capacity — 0 to 6 YPH
• Mixer capacity — 9 cu. ft.
• Receiving hopper capacity — 12 cu. ft.

Harga :

Blastcrete RD6536-P

The Blastcrete Model RD6536 Pump is our concrete pump with variable speed from 0-25 cubic yards per hour. This pump is designed to pump up to 3/4 inch aggregate concrete, concrete block fill (grout), shotcrete, floor leveling cement, mud jacking, and cellular concrete. The machine is powered by a 29 HP Kubota water cooled diesel and is equipped with our 1000 lb. capacity receiving hopper with hydraulic agitator. The unit is mounted on a single axle high speed towing trailer with electric brakes and electric braking lights.

Features

• 3" Hydraulic Squeeze Pump with variable speed from 0-25 cubic yards per hour
• Single Axle High Speed Towing Trailer with Electric Brakes
• Manual Hydraulic Controls-Forward-Neutral-Reverse with Flow Control and Hydraulic Gauge
• 1,000 lb. Capacity Receiving Hopper with Agitator, Splash Guard, and Hopper Cover

Power Options

• 29 HP Kubota Water Cooled Diesel Engine
• 35 HP Air Cooled Briggs and Stratton Gasoline Engine

Options

• Pendant Remote
• Wireless Remote

Specifications

• Length — 160"
• Width — 88"
• Height (Top of Receiving Hopper) — 45"
• Gross Weight — 3900 lbs.
• Output Capacity — 25 cubic yards per hour
• Pump Discharge — 3"
• Fuel Tank — 10 ga.

Harga :

Blastcrete HRG-020

The Blastcrete Hydrostatic Rotary Gunite machine has become the industry standard for refractory gunning applications since its inception in 1987. The unit is equipped with the simple single point Piccola clamping system, manual ON/OFF hydraulic control, and hydrostatic variable rotor speed control. The Blastcrete Hydrostatic Rotary Gun can be powered with an electric motor, air motor, gasoline, or diesel engine. This machine is the smoothest rotary gun within the refractory gunning arena

Features

• Simple Piccola Single Point Clamping System
• Precise Material Output Control
• Recommend By All Major Refractory Material Manufacturers

Power Options

• 5 HP Electric Motor (240V. or 480V. 3 Phase)
• 16 AM Gast Air Motor
• 13 HP Honda Gasoline Engine

Options

• Hydrostatic Predampener
• Water Booster Pump
• Skid Mounted with Forklift Pickup
• 12 Hole Round Half rotor
• 12 Hole Round Full Rotor
• 9 Hole Round Full Rotor
• 12 Hole Sector Full Rotor

Specifications

• Air Requirement — 250-600 CFM (depending on power options)
• Output — 0-6 tons per hour
• Outlet — 1.5" Connection Cup
• Maximum Aggregate — 3/4"
• Mounting — Foam Filled Tires
• Estimated Wear Pad Life — 200 tons
• Dimensions — 70" x 40" x 54"
• Weight — 1200 lbs.

Harga :

Blastcrete HBS-1500

The Blastcrete HBS-1500 is our newly designed mixer/pump designed for mixing and pumping gypsum flooring materials extreme distances. Our 4 in. hydraulic ball seat pump is capable of producing 1000 PSI line pressure and can consistently pump gypsum materials in excess of 600 ft. at a rate of 130 bags per hour. The ball seat design will drastically reduce maintenance cost vs. competitive machinery. The HBS-1500 is equipped with our 12 cu. ft. hydraulic spiral mixer (30 second mix time) that dumps into our 26 cu. ft. receiving hopper that includes our conveying hydraulic agitator. Our receiving hopper and pump manifold unclamp from the pumping tubes allowing easy clean up of the ball-seat manifold and material pumping tubes. The HBS-1500 can also be used to pump concrete mixes up to 1/2 in. aggregate positioning this machine as the most versatile and user-friendly for gypsum flooring contractors. Best value, most versatile, longest pumping distances, and lowest maintenance mixer-pump on the market!

Features

• 4" Hydraulic Ball Seat Pump with 1000 PSI Pump Pressure Capability
• 12 cu. ft. Hydraulic Spiral Mixer with Hydraulic Dump
• 26 cu. ft. Receiving Hopper with Hydraulic Agitator
• Dual Axle Trailer with (2) Braking Axles
• Heavy Duty Tubular Frame
• 150 ga. Water Tank with 2" Flow Meter
• Heavy Duty Manual Leveling Jacks (4)
• Lowest cost wear parts in the industry

Power Options

• 70 HP Kubota Water Cooled Diesel

Options

• 2000 PSI Hydraulic Pressure Washer
• Spare Tire
• Electric Power
• Skid Mount
• Custom Paint

Specifications

• Length — 234"
• Width — 92"
• Height (Water Tank) — 93"
• Height (Mixer Dump Position) — 95"
• Mixer Charging Height — 57"
• Weight — 8350 lbs.
• Output — 0-15 cubic yards per hour
• Mixer Capacity — 12 cubic feet
• Receiving Hopper Capacity — 26 cubic feet
• Pump — 4" Hydraulic Ball Seat

Harga :

Blastcrete Dampcon

The New Blastcrete Dampcon Rig is our exciting predampening and gunning system designed to predampen and install dry process shotcrete materials. The unit is equipped with our 9 cubic ft. capacity paddle style mixer with wipers and swing out capability, material elevator, and the proven 020 'Piccola' rotary gunite machine that includes the single bolt clamping system. The Dampcon Rig was designed for simple operation, easy clean up and minimal maintenance. The unit is ideal for precise refractory gunning installations and concrete repair applications. The Blastcrete Dampcon Rig is powered by a Kubota V1505 29 HP water cooled diesel engine or a 30 HP electric motor. Mounting options include a tandem axle trailer or skid mounted with forklift pickup.

Features

• 9 cubic foot Capacity Paddle Mixer with Rubber Wipers
• Swing Out Mixer for Easy Cleaning
• Variable Speed Mixer, Conveyor, and Gunite Machine
• Blastcrete 020 Rotary Gunite Machine with 0-6 cu. yards per hour

Power Options

• Kubota V1505 29 HP Water Cooled Diesel
• 20 HP Electric Motor with Starter and Disconnect

Options

• Dual Axle Trailer or Skid Mount with Forklift Pockets
• Hydraulic Water Booster Pump

Specifications

• Length — 205"
• Width — 75"
• Charging height — 51"
• Weight — 5500 lbs
• Air Requirements — 250 CFM @ 80 PSI

Harga :

Blastcrete H-020

The Blastcrete Model H 020 is our simple hydraulic rotary gunite machine attachment that is variable speed from 0-5 cubic yards per hour. This machine is equipped with the proven Genuine Piccola single point clamping system and offers precise material output control. The hydraulic requirement is 10 GPM @ 1500 PSI and is universal with any hydraulic power unit with this capacity. Since this is a hydraulic machine, the air requirement is only 225 CFM.

Features

• Simple Piccola Single Point Clamping System
• Precise Material Output Control
• Universal Mounting Plate
• Forklift Pickup Tubing
• Rotor of Your Choice

Specifications

• Air Requirement — 225 CFM minimum
• Output — 0-5 yards per hour
• Outlet — 1.5"
• Maximum Aggregate — ¾"
• Mounting — Skid Mount
• Estimated Wear Pad Life — 200 tons
• Dimensions — 34" x 34" x 50"
• Weight — 1250 lbs.

Harga :

Blastcrete D3522-A

The Blastcrete Model D3522 Attachment is our solution for hot epoxy grouting contractors that currently own hydraulic power units. Simply couple the D3522 Attachment to your hydraulic power and this pump offers variable speed pumping from 0-6 cubic yards per hour and delivers up to 400 PSI pumping pressure. These are the most simple and safe epoxy pumps on the market to maintain and operate. Since no epoxy material comes in contact with the moving parts of the pump, you will be pleased with the life of this machine.

Features

• Simple 2" Hydraulic Squeeze Pump Driven by Heavy Duty Planetary Gearbox
• Lowest Cost Pump to Purchase, Own, and Operate
• Longest Lasting Pumping Tubes in the Industry

Power Options

• Works with your own hydraulic power units

Specifications

• Length — 76"
• Width — 37"
• Height — 39"
• Hopper Charging Height — 28"
• Output Capacity — 0-6 cubic yards per hour
• Hydraulic Oil Requirement — 10 gpm @ 3000 PSI

Harga :

Blastcrete Predampener

The Blastcrete Predampener is designed to add up to 5% moisture to gunning materials to insure proper hydration at the nozzle with minimal rebound. Our predampener is completely hydrostatic allowing precise material predampening and output control. This unit is equipped with 2 solenoid activated water nozzle with simple water volume adjustment.

Features

• 9 inch Hydrostatic Predampening Auger
• Mixing Auger with Removable Rubber Enclosure
• Up to 3000 lb. Capacity Hopper with Material Feed Screw
• Two Solenoid Water Bars
• 20 HP Electric Motor, Disconnect, and Enclosure
• Skid Mounted with Forklift Tubing
• Recommend By All Major Refractory Material Manufacturers
• Forklift Pickup

Power Options

• 20 HP Electric Motor (240V. or 480V. 3 Phase)

Options

• Trailer Mounted

Specifications

• Output — 0-12 tons per hour
• Mounting — Skid Mount with Forklift Pickup
• Dimensions — 156" x 60" x 72"
• Weight — 2800 lbs.

Harga :

Blastcrete MineMate

The Blastcrete MineMate is our newly designed labor saving technology that combines our X-10 ultra high pressure swing tube piston pump with our high shear continuous mixer. The MineMate is designed to mix and pump concrete materials for underground mine seals, grouting, and underground shotcrete applications when ready mix concrete is not an option. This machine is capable of mixing and pumping up to 12 cubic yards per hour and pumping material in excess of 500 ft. This low profile machine is also equipped with a material screw conveyor with bin indicator for charging the continuous mixer.

Features

• 3" X 24" Ultra High Pressure Swing Tube Piston Pump
• High Shear Continuous Mixer
• Screw Conveyor to Charge Continuous Mixer-Operates within 6 ft. Ceiling
• Can Pump Materials in Excess of 500 ft.

Power Options

• 50 HP Electric Motor with Starter and Disconnect
• Kubota V3600 66 HP Kubota Water Cooled Diesel

Options

• Hydraulic Receiving Hopper Agitator
• Pendant or Wireless Remote
• Hydraulic Pressure Washer

Specifications

• Pump — 3" x 24" Ultra High Pressure Swing Tube Piston Pump
• Pumping Pressure — 2200 PSI
• Output — 0-12 Cubic Yards Per Hour
• Discharge — 3" HD
• Hopper — 3 Cubic Feet
• Dimensions — 120" x 60" x 48" (Bag Lifter in Charging Position)
• Weight — 3500 lbs.

Harga :

Blastcrete MasonMate

The Blastcrete Mason Mate is our newly designed labor saving technology that is equipped with our D3522 hydraulic squeeze pump, our high shear continuous mixer, 1000 lb. bag lifter, and operated with 35 HP Briggs and Stratton gasoline engine. The Blastcrete Mason Mate is designed for high rise block fill applications. This machine eliminates CMU block fill bucket brigades while reducing on the job labor by up to 75%. The unit is designed to fit within a freight elevator or can be placed with a telescoping forklift or crane. Designed to reduce dust, increase material placement time, and maximize your profitability.

Features

• Simple D3522 2" Hydraulic Squeeze Pump Driven by our Heavy-Duty Planetary Gearbox
• High Shear Continuous Mixer
• 1000 lb. Capacity Bulk Bag Lifter
• Designed to Moved with a Pallet Jack
• Operates within 8 ft. Ceiling
• Lowest Cost Pump to Purchase, Operate, and Maintain
• Longest Lasting Pumping Tubes in the Industry

Power Options

• Kubota Water Cooled Diesel
• 35 HP Briggs and Stratton Gasoline Engine
• 30 HP Electric Motor with Starter and Disconnect

Options

• Hydraulic Receiving Hopper Agitator
• Pendant or Wireless Remote
• Hydraulic Pressure Washer
• Air Compressor Mounted

Specifications

• Pump — 2" D3522 Hydraulic Squeeze Pump
• Pumping Pressure — 400 PSI
• Output — 0-6 Cubic Yards Per Hour
• Discharge — 2" HD
• Hopper — 3 cu. ft.
• Dimensions — 90" x 44" x 72" (Bag Lifter in Charging Position)
• Weight — 2,600 lbs.

Harga :

Blastcrete Pan-Mixer

The Blastcrete 2200 lb. Capacity Pan Mixer is our reliable hydrostatic pan mixer designed for mixing up to 1 metric ton of refractory castable. The mixer is driven by our heavy duty planetary gearbox achieving consistent 1.5 to 2 minute mix times for most materials. The 15 sq. ft. operator's platform includes our simple control panel for FORWARD/STOP/REVERSE mixer rotation, bottom slide door OPEN/CLOSE, Fill-Rite Water Meter for precise water addition, and manual mixer tilt hydraulic controls for clean out. 

Features

• 1.5 to 2 Minute Mix Time
• 2200-Pound Hydraulic Pan Mixer with Bottom Discharge
• Fill-Rite Water Meter and 20 Gallon Dousing Tank
• Fork Lift Pick-Up Points
• Operators Platform with Guard Rails and Ladder
• Telescoping Adjustable Legs

Power Options

• 40 HP Electric Motor with Starter and Disconnect

Options

• Hydraulic Discharge Chute
• Power Supply Mounted Separately
• Hydraulic Leg Adjustment
• 2000 PSI Hydraulic Pressure Washer
• Height Discharge Adjustments (3)

Specifications

• Weight — 4500 lbs.
• Length — 120"
• Width — 72"
• Height (Down Position) — 82"
• Height (Raised Position) — 103"
• Material Discharge Height (Down Position) — 52"
• Material Discharge Height (Raised Position) — 72"

Harga :

Blastcrete X-10

The X-10 is our ultra high pressure swing tube piston pump designed for refractory and shotcrete applications up to 12 cubic yards per hour. This is the most user-friendly pump on the market to operate and maintain. The unit includes our simple swing out hopper for fast access to the swing tube section for cleaning and maintenance, rugged receiving hopper agitator, forklift tubing mounted to the lower hopper for easy flat pack removal, and includes our reliable solid state electronics. The piston face pressure for this machine is 2200 PSI that allows you to pump material further than any competitive equipment.

Features

• Fastest Return On Investment
• 2200 PSI Piston Face Pressure for rugged Refractory Pump Cast and Shotcrete Applications
• Simple Swing Out Receiving Hopper for Easy Access to Swing Tube Section for Cleaning and Maintenance
• Forklift Tubing Mounted to Lower Hopper for Easy Flat Pack Removal
• Reliable Solid State Electronics
• CE Certification

Power Options

• Kubota V3600 66 HP Kubota Water Cooled Diesel
• 40 HP Electric Motor

Options

• 2,000 PSI Hydraulic Pressure Washer
• Vogel Auto Lubrication System
• Spare Tire Mounted
• Pendant or Wireless Remote
• Skid Mounted with Forklift Tubing

Specifications

• Pump — 3" x 24" Ultra High Pressure Swing Tube
• Pump Pressure — 2200 psi
• Output — 0-12 Cubic Yards Per Hour
• Discharge — 3"
• Hopper — 2,500 lb. Capacity Swing Out Receiving Hopper with Hydraulic Agitator
• Operating Platform — 22 sq. ft.
• Electrical — Solid State Value Control
• Trailer — Single 6,000 lb. Capacity Axle with Electric Braking and Lights
• Dimensions — 156" x 76" x 80"
• Weight — 4,500 lbs.

Harga :

Blastcrete D6528-MP

The Blastcrete Model D6528 Mixer/Pump is designed for field batching and pumping up to 12 cubic yards per hour. The unit includes our 9 cubic foot hydraulic spiral mixer that hydraulically dumps into our 12 cubic foot receiving hopper. From the hopper, the material is pumped by our D6528 3 inch hydraulic squeeze pump with variable speed from 0-12 cubic yards per hour. This machine is a popular solution for gypsum flooring applications as this unit is more reliable and user-friendly than competitive equipment.

Features

• 9 cubic foot Hydraulic Spiral Mixer with Hydraulic Dump and Clean Out Door
• 12 cubic foot Receiving Hopper with Hydraulic Agitator
• Simple 3" Hydraulic Squeeze Pump Driven by a Heavy Duty Planetary Gearbox
• Lowest Cost Pump to Purchase, Own, and Operate
• Longest Lasting Pumping Tubes in the Industry

Power Options

• Kubota V1505 29 HP Water Cooled Diesel
• 30 HP Electric Motor with Starter and Disconnect

Options

• Pendant or Wireless Remote
• 150 ga. Water Tank with 2" Flow Meter
• Spare Tire Mounted
• Hydraulic Pressure Washer
• Dual Axles
• Air Compressor Mounted

Specifications

• Length — 204"
• Width — 88"
• Height of water tank — 89"
• Height Mixer (Dump position) — 86"
• Charging height — 48"
• Output capacity — 0 to 12 Cubic Yards Per Hour
• Mixer capacity — 9 cubic foot
• Receiving hopper capacity — 12 cubic feet

Harga :

Blastcrete Multi-Rig

The Blastcrete Multirig is designed for field batching concrete sand and cement for dry process shotcrete applications. This unit is equipped with our 1,500 lb. capacity pan mixer that is easily loaded with a skid steer. The material is blended in 1.5 to 2 minutes and discharges from the bottom slide door onto the rubber belt conveyor. The conveyor simply feeds our rotary gunite machine that is variable speed from 0-6 tons per hour. This machine is powered with a reliable 29 HP Kubota water cooled diesel.

Features

• 1500 lb. Capacity Hydrostatic Pan Mixer
• Variable Speed Rubber Belt Conveyor
• 020 Rotary Gunite Machine with Variable Speed from 0-6 Tons Per Hour
• Mixer Tilt for Easy Clean Up

Power Options

• Kubota V1505 29 HP Water Cooled Diesel

Options

• Water Booster Pump
• Skid Mounted with Forklift Tubing

Specifications

• Output — 0-6 tons per hour
• Mounting — Trailer Mounted with Dual Electric Braking Axles and Lights
• Dimensions — 249" x 76" x 72"
• Weight — 7,000 lbs.

Harga :

Blastcrete MX-20CM

The Blastcrete Model MX-20CM mixer/pump has been designed to revolutionize refractory placement. This machine can be used for both small refractory installations of 2-3 tons per hour as well as high volume installations of up to 25 tons per hour. The machine features a compact two-stage high-shear primary continuous mixer where the material is hydrated, and a medium shear secondary mixer that is mounted in the receiving hopper of the 4 in. high pressure swing tube pump. While the discharge pressure of the 4 in. pump is an industry leader, the hydraulic pressure to operate the pump is much lower because of oversized differential cylinders. The popular and proven swing out receiving hopper is also a feature of the new pump making it much easier to clean and service. Dust generated in charging the continuous mixer is all but eliminated, and the clean up of the continuous mixer is much quicker and generates very little waste. The efficiency of the two stage mixer and pump with oversized differential allow for the machine to require only 100 H.P. which lowers fuel consumption by 50% when compared to competitive machines. The towing weight of the machine is only 7,500 pounds.

Features

• Fastest Return on Investment
• 4" x 36" Swing Tube Piston Pump with 2200 PSI Piston Face Pressure for rugged Refractory Pump Cast and Shotcrete Applications
• High Shear Continuous Mixer with 25 ton per hour output
• Simple Swing Out Receiving Hopper for Easy Access To the Swing Tube Section for Cleaning and Maintenance
• Forklift Tubing Mounted to Lower Hopper for Easy Flat Pack Removal
• 0-20 gallon Flow Meter
• Reliable Solid State Electronic Controls
• Simple Overhead Crane Pick Up
• No Special License Needed to Tow
• CE Certification

Power Options

• 99 HP John Deere Water Cooled Diesel
• 102 HP Deutz Water Cooled Diesel
• Dual Electric Motors

Options

• 2000 PSI Hydraulic Pressure Washer
• Vogel Auto Lubrication System
• Spare Tire Mounted
• Pendant Remote
• Skid Mounted with Forklift Tubing

Specifications

• Pump — 4" x 36" Ultra High Pressure Swing Tube Pump
• Pump Output — 0-25 tons per hour
• Piston Face Pressure — 2200 PSI
• Mixer — High Shear Continuous Mixer
• Mixer Output — 0-25 tons per hour
• Dry Hopper — 3000 lb. Capacity
• Receiving Hopper — 1500 lb. Capacity with Hydraulic Agitator
• Crane Pick Up — Four Point Pick Up-No Spreader Bar Needed
• Electrical — Solid State Value Control
• Trailer — Dual 6000 lb. Capacity Axles with Electric Braking and Lights
• Dimensions — 220" x 89" x 108"
• Weight — 7500 lbs.

Harga :

Blastcrete D3522-P

The Blastcrete Model D3522 Pump is our compact 2 inch hydraulic squeeze pump with variable speed from 0-6 cubic yards per hour. This unit is ideal for concrete repair, epoxy, block fill, and various plaster and stucco applications. The machine can be trailer or a lower profile skid mounted to meet your needs. The unit is powered with a reliable Kubota water cooled diesel or 24 HP Honda gasoline engine.

Features

• Simple D3522 2" Hydraulic Squeeze Pump Driven by our Heavy-Duty Planetary Gearbox
• 6 cubic foot Receiving Hopper
• Lowest Cost Pump to Purchase, Operate, and Maintain
• Longest Lasting Pumping Tubes in the Industry

Power Options

• Kubota Water Cooled Diesel
• 24 Honda Gasoline Engine
• 10 HP Electric Motor

Options

• Hydraulic Receiving Hopper Agitator
• Pendant or Wireless Remote
• Spare Tire Mounted
• Skid Mounted with Forklift Tubing
• Hydraulic Pressure Washer
• Air Compressor Mounted

Specifications

• Pump — 2" D3522 Hydraulic Squeeze Pump
• Pumping Pressure — 400 PSI
• Output — 0-6 Cubic Yards Per Hour
• Discharge — 2" HD
• Hopper — 6 cu. ft.
• Trailer — Single 6,000 lb. Capacity Axle with Electric Braking and Lights
• Dimensions — 166" x 88" x 54"
• Weight — 2,800 lbs.

Harga :

Blastcrete MX-10

 The MX-10 is our ultra high-pressure 3-inch swing tube mixer/pump designed for dense refractory shotcrete and pump cast applications. Since 1996, this machine has become the industry standard for monolithic refractory installations. Our high torque pan mixer combined with our ultra high pressure piston pump can consistently deliver 10 tons per hour. This machine is commonly used to pump refractory materials in excess of 300 ft. vertical during the most demanding refractory installations. Our swing out receiving hopper allows easy access to the lower hopper for cleaning and maintenance and the lower hopper is equipped with forklift tubing for easy flat pack removal. Fastest return on investment, best equipment, outstanding customer service, WORLDWIDE!

Features

• Fastest Return On Investment
• 2200 PSI Piston Face Pressure for rugged Refractory Pump Cast and Shotcrete Applications
• 2200 lb. Capacity High Torque Pan Mixer (1.5 to 2 minute Mix Time)
• Simple Swing Out Receiving Hopper for Easy Access to Swing Tube Section for Cleaning and Maintenance
• Forklift Tubing Mounted to Lower Hopper for Easy Flat Pack Removal
• Fill Rite Water Meter
• 20 ga. Dousing Bucket for Fast Water Introduction
• Reliable Solid State Electronics
• CE Certification

Power Options

• John Deere 4045T 99 HP Water Cooled Diesel
• Deutz BF4M 2012 102 HP Water Cooled Diesel
• Dual 40 HP Electric Motors

Options

• 2,000 PSI Hydraulic Pressure Washer
• Vogel Auto Lubrication System
• Spare Tire Mounted
• Pendant or Wireless Remote
• Skid Mounted with Forklift Tubing

Specifications

• Pump — 3" x 24" Ultra High Pressure Swing Tube
• Pump Pressure — 2200 psi
• Mixer — 2200 lb. Capacity Hydraulic Pan Mixer
• Output — 0-12 Cubic Yards Per Hour
• Discharge — 3"
• Hopper — 2,500 lb. Capacity Swing Out Receiving Hopper with Hydraulic Agitator
• Operating Platform — 22 sq. ft.
• Crane Pickup — Central Four Point Pickup-No Spreader Bar Needed
• Electrical — Solid State Value Control
• Trailer — Dual 6,000 lb. Capacity Axles with Electric Braking and Lights
• Dimensions — 204" x 88" x 117"
• Weight — 9,000 lbs.

Harga :

Blastcrete RD6536-SSP

The Blastcrete Model RD6536 Squeeze Pump hydraulic concrete pump attachment offers variable speed from 0-25 cubic yards per hour. This concrete pump attachment is successfully used for pumping grout materials, 3/8-inch shotcrete, and 3/4-inch structural concrete mixes. The hydraulic oil requirement for the RD6536 is 18 gallons per minute at 3000 PSI. The primary wear part on the pump is the 3-inch rubber pumping tube that can be replaced in the field in 20 minutes. These are the most simple and safe concrete pumps on the market to maintain and operate. Since no concrete material comes in contact with the moving parts of the pump, you will be pleased with the life of this machine.

Features

• Forklift Pick-Up
• 3" Hydraulic Squeeze Pump with variable speed from 0-25 cubic yards per hour
• Universal Skid Steer Mounting Plate
• Manual Hydraulic Controls
• Hydraulic Remixer in the Receiving Hopper
• Will Pump 3/4" Aggregate Concrete Mixes
• Will Pump 3/8" Aggregate Shotcrete

Specifications

• Length — 76"
• Length (w/ Receiving Hopper) — 89"
• Width — 48"
• Width (w/Receiving Hopper) — 55"
• Height — 48.25"
• Charging Height — 40.25"
• Weight — 2700 lbs.
• Output — 25 Cubic YPH
• Pump Outlet — 3"
• Pump Pressure — 400 PSI
• Hydraulic Oil Requirement — 18 gpm @ 3000 PSI
• Vertical Pumping Distance — 100 ft.
• Horizontal Pumping Distance — 250 ft.

Harga :