Latest Product :
Home » , » Messersi Excavators M-50K

Messersi Excavators M-50K

- Engine complies to the norm 97/68/EC Stage 3 relevant to the polluting emissions.
- Straight travel circuit, automatically engaged.
- “DUAL MODE” switch to double the speed of the boom and the dipstick and increase the productivity of the machine.
- Two tracks speeds via axial piston motors with automatic change of the displacements according to drive, from high to slow travelling speed (Auto Two Speed device).
- Soundproof cabin with a double partition for a better insulation of the engine. Cab is easily accessible with dimensions of 1050 mm x 1370 mm x 1550 mm. (A width of 1050 mm. is typical of excavators with weight of more than 10 tons.). Door is 700 mm wide. Cab inside has been totally renewed in materials and design.
- Extraordinary manoeuvrability due to the employment, on all the functions of pilot assisted controls.
- Its round shaped design recalls the other models of the range, thus creating a continuity of style and image, and giving a strong personalization to all Messersì Mini Excavators.
- Very easy access to the hydraulic components, thanks to the new position of the distributor, which has been placed on the right side of the machine.
- Automatic lock of all the pilot assisted controls when the armrest is lifted.
- The wide opening of the hinged lateral ballasts provide an easy access to the engine and to the hydraulic components of the transmission.

Standard equipment

Cab with heating system Bucket of 600 mms. (SAE capacity lt. 180) – Second travel speed electrically selected Excavating arm of 1500 mm. – Power Take Off for hydraulic tools – Dual Mode switch.

Optional equipment

Buckets from 300 to 1000 mm.
standard, for rocks and for quick hitches – Buckets for slopes fixed and orientable – Slopes cleaning buckets – Mechanical or hydraulic bucket quick hitches – Hydraulic breaker – Hydraulic manual breaker – Hydraulic drill – Grass-bush cutter – Steel tracks – Longer digging arm of 1850 mm. – Two-piece boom – Floating refilling blade – Air conditioning.

Hydraulic system

Hydrostatic transmission with orbital motors and planetary reduction gears with negative brakes.
Travelling counter-balance valves.
N.2 variable displacement piston pumps + gear pumplt/min58 x 2 + 39
Total deliverylt/min155
Auxiliary hydraulic flow for P.T.O.lt/min97
Max working pressurebar250 / 215
Slew speed (with piston motors and negative brake)g/min9.0
Boom, arm, bucket and slew actuated by servo-controlled joysticks.
Levers to control track and dozer blade; pedals to control boom swing and single and double effect P.T.O.
Heat exchanger for oil cooling.

Undercarriage

Box section steel frame
Track type and widthmmrubber 400
Track bearing rollers5+5 low/1+1 up
Track tensioninggrease
Dozer blademm370 x 1870

Performances

Shipping weight with cabKg3500
Operating weight with cabKg4900
Break out forcedaN4000
Digging force (arm l=1500/1850)daN2800 / 2450
Travel speedKm/h2.6 / 4.7
Max gradient capabilitymore than %100
Specific ground pressureKg/cm²0.290

Refuelling

Fuel tank capacitylt60
Hydraulic oil tank capacitylt45

Engine

Make and modelKubota D1703M
Max power at 2600 rpm (DIN 6271)HP/Kw51 / 38
Rated horse power at 2200 rpmHP/Kw45 / 35
Cylinders4
Displacementcm³2434
Coolingwater
Battery1 – 12 V – 105 Ah

Harga :
Info Kredit :
Sewa atau Kontrak :
Share this article :

Posting Komentar

 
Support : Mobil | Motor | Sepeda
Copyright © 2011. Alat Berat - All Rights Reserved
Template Modify by Creating Website
Proudly powered by Blogger