Latest Product :
Home » , » Hitachi Excavators ZX300LC-6

Hitachi Excavators ZX300LC-6

The ZX300LC-6 is one of the newest models in Hitachi’s Dash-6 lineup. Loaded with numerous customer-driven enhancements, Dash-6 Excavators are purpose-built to deliver more efficiency, reliability, and durability. Front and center is a new, fuel-efficient EPA Final Tier 4 (FT4)/EU Stage IV Isuzu engine that meets rigid emission standards – no diesel particulate filter needed. Plus, you’ll get generous swing torque, dig force, and lift capacity. The spacious cab is designed for operator comfort and productivity, and standard upper-structure handrails provide added safety and accessibility.
The ZX300LC-6 comes standard equipped with five years of ZXLink™ Ultimate, giving you 24/7 online access to machine location, health, utilization, fuel consumption, and other valuable information – so you can better understand costs and jobsite performance.

FEATURES

1. Engine
1.1. The Isuzu EPA Final Tier 4 (FT4)/EU Stage IV engine delivers fuel-efficient and reliable performance. Fuel pressure, timing and volume are precisely regulated by electronic control for efficient combustion with Isuzu’s common-rail fuel injection system.
1.2. The pressurized fuel system improves fuel injector operation, and the fuel recirculation system helps prevent fuel gelling in cold climates – so you can maintain maximum productivity.
1.3. Auto-idle, which reduces engine speed when hydraulics aren’t in use, and auto-shutdown contribute to fuel efficiency.

2. Durable structure and undercarriage
2.1. Thick-plate single-sheet mainframe, box-section track frames and industry-exclusive double-seal swing bearing deliver rock-solid durability.
2.2. With large idlers, rollers and strutted track links, the sealed and lubricated undercarriage is built for the long haul.
2.3. Reinforced D-channel side frames provide maximum cab and component impact protection.
2.4. Tungsten-carbide coated wear surfaces protect the critical bucket-to-arm joint.
2.5. Oil-impregnated bushings enhance durability and extend lube intervals to 500 hours for the arm-and-boom joint and 100 hours for the bucket joint.

3. Hydraulics
3.1. A redesigned boom and arm and larger hydraulic pumps make the ZX300LC-6 even tougher.
3.2. Generous swing torque, digging force, and lift capacity help keep you on schedule.
3.3. Whatever your grade system, Topcon, Trimble or Leica, Hitachi offers a grade reference-ready package that reduces installation time by half.

4. Comfortable cab
4.1. Optional cab and right-side boom lights provide extra illumination to extend your production.
4.2. Get unobstructed all-around visibility thanks to a new hood design paired with a wide expanse of front, side, and overhead glass and mirrors.
4.3. Operators get maximum support from a sculpted mechanical suspension high-back seat. Seat has 318 mm (12.5 in.) of travel, sliding together or independent of the joystick console. For even more comfort, opt for the air-suspension heated seat.
4.4. Automatic, high-velocity, bi-level climate-control system with automotive-style adjustable louvers helps keep the glass clear, the cab comfortable and the operator productive.

5. Simple controls
5.1. Multi-language LCD monitor and rotary dial provide intuitive access to machine info and functions. Just turn and tap to select work modes, monitor maintenance intervals, check diagnostic codes, and set cab temperature. Control oil flow and toggle between dig and thumb modes with a programmable thumb attachment mode.
5.2. Ergonomically correct short-throw pilot levers provide smooth, precise control with less effort. Pushbuttons in the right lever allow control of auxiliary hydraulic flow for attachments. Optional sliding switch provides proportional speed control, giving you full command from your fingertips.
5.3. It’s not always about brute force. Unmatched metering and smooth multifunction operation provide plenty of finesse and precision, too.

6. Easy to maintain
6.1. Centralized lube banks place zerks within easy reach, making greasing less messy and time consuming.
6.2. Engine oil, fuel, and hydraulic pilot oil filters are all located on the same side at ground level for easy servicing.
6.3. Upper-structure handrails provide added safety when servicing the engine compartment, and a larger hood gives you better engine accessibility.
6.4. Our field-proven technology is simple and efficient, employing cooled exhaust gas recirculation (EGR), a diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR). An improved piston design allows particulate matter to be burned in cylinder, so there’s no need for a diesel particulate filter (DPF).
6.5. A battery disconnect switch, located in the rear door behind the cab, is easily accessible and extends battery life.
6.6. The FT4 engine solution does not require a diesel particulate filter (DPF), saving service time and lowering operating costs.

7. ZXLink™
7.1. The ZX300LC-6 is standard equipped with Hitachi’s ZXLink™ system, giving you the power to optimize your operation and maximize your profits. With the support of your dealer you can use your data to reduce idling time as well as maximize productivity and uptime. Without ever leaving your seat you’ll have access to fleet location, functions, hours, fuel consumption, alerts and other essential machine data. You can also view location and alert information in the field from your iOS or Android devices.

SPECIFICATIONS :
Driveline
Emission Rating
Tier 4
Number Of Cylinders
6
Displacement
7.79 ltr
475 Inches³
Rated speed
1900 rpm
Engine Output - Net
186 kW
249 hp
Number Of Carrier Rollers - Each Side
2
Number Of Track Rollers - Each Side
8
Track Shoe Width
800 mm
32 inches
Dimensions
Transport Length Mono Boom
10710 mm
35 ft 2 in ft/in
Transport Height - Maximum
3380 mm
11 ft 1 in ft/in
Overall Undercarriage Width
3390 mm
11 ft 1 in ft/in
Track Length On Ground
4050 mm
13 ft 3 in ft/in
Overall Undercarriage Length
4940 mm
16 ft 2 in ft/in
Tailswing Radius
3250 mm
10 ft 8 in ft/in
Ground Clearance
510 mm
20 inches
Width over fixed tracks
3390 mm
11 ft 1 in ft/in
Track Gauge
2590 mm
8 ft 6 in ft/in
Digging Reach - Mono Boom
11270 mm
37 ft ft/in
Ground Level Reach - Mono Boom
11090 mm
36 ft 5 in ft/in
Dig Height - Mono Boom
10470 mm
34 ft 4 in ft/in
Dump Height - Mono Boom
7540 mm
24 ft 9 in ft/in
Dig depth - 2.44m / 8'ft flat bottom
7710 mm
25 ft 4 in ft/in
Dig Depth - Mono Boom
7870 mm
25 ft 10 in ft/in
Capacities
Fuel Tank
510 ltr
135 gallons (US)
Hydraulic Tank
156 ltr
41 gallons (US)
Performance
Ground Bearing Pressure
41 kPa
5.95 PSI
Dipper Tearout
127 kN
28551 lbf
Weights
Operating Weight
29449 kg
64924 lbs

Harga :
Info Kredit :
Sewa atau Kontrak :
Lokasi Dealer/ Showroom :
Share this article :

Posting Komentar

 
Support : Mobil | Motor | Sepeda
Copyright © 2011. Alat Berat - All Rights Reserved
Template Modify by Creating Website
Proudly powered by Blogger