The ZX350LC-6 come standard equipped with five years of ZXLink™ Ultimate, giving you 24/7 online access to machine location, health, utilization, fuel consumption, and other valuable information – so you can better understand costs and jobsite performance.
This workhorse is also available with optional integrated Grade Guidance developed in cooperation with Topcon. Grade Guidance can help you complete your precision-excavation application quicker and more efficiently. Your machine arrives ready to work with the system installed, measured and calibrated.
FEATURES
1. Engine
1.1. The Isuzu EPA Final Tier 4 (FT4)/EU Stage IV engine delivers fuel-efficient and reliable performance. Fuel pressure, timing and volume are precisely regulated by electronic control for efficient combustion with Isuzu’s common-rail fuel injection system.
1.2. The pressurized fuel system improves fuel injector operation, and the fuel recirculation system helps prevent fuel gelling in cold climates – so you can maintain maximum productivity.
1.3. Auto-idle, which reduces engine speed when hydraulics aren’t in use, and auto-shutdown contribute to fuel efficiency.
2. Durable structure and undercarriage
2.1. Thick-plate single-sheet mainframe, box-section track frames and industry-exclusive double-seal swing bearing deliver rock-solid durability.
2.2. With large idlers, rollers and strutted track links, the sealed and lubricated undercarriage is built for the long haul.
2.3. Reinforced D-channel side frames provide maximum cab and component impact protection.
2.4. Tungsten-carbide coated wear surfaces protect the critical bucket-to-arm joint.
2.5. Oil-impregnated bushings enhance durability and extend lube intervals to 500 hours for the arm-and-boom joint and 100 hours for the bucket joint.
3. Hydraulics
3.1. Stay on schedule with generous swing torque, digging force, and lift capacity.
3.1. Whatever your grade system, Topcon, Trimble or Leica, Hitachi offers a grade reference-ready package that reduces installation time by half.
4. Comfortable cab
4.1. Optional cab and right-side boom lights provide extra illumination to extend your production.
4.2. Get unobstructed all-around visibility thanks to a new hood design paired with a wide expanse of front, side, and overhead glass and mirrors.
4.3. Operators get maximum support from a sculpted mechanical suspension high-back seat. Seat has 318 mm (12.5 in.) of travel, sliding together or independent of the joystick console. For even more comfort, opt for the air-suspension heated seat.
4.4. Automatic, high-velocity, bi-level climate-control system with automotive-style adjustable louvers helps keep the glass clear, the cab comfortable and the operator productive.
5. Simple controls
5.1. Multi-language LCD monitor and rotary dial provide intuitive access to machine info and functions. Just turn and tap to select work modes, monitor maintenance intervals, check diagnostic codes, and set cab temperature. Control oil flow and toggle between dig and thumb modes with a programmable thumb attachment mode.
5.2. Ergonomically correct short-throw pilot levers provide smooth, precise control with less effort. Pushbuttons in the right lever allow control of auxiliary hydraulic flow for attachments. Optional sliding switch provides proportional speed control, giving you full command from your fingertips.
5.3. It’s not always about brute force. Unmatched metering and smooth multifunction operation provide plenty of finesse and precision, too.
6. Easy to maintain
6.1. Centralized lube banks place zerks within easy reach, making greasing less messy and time consuming.
6.2. Engine oil, fuel, and hydraulic pilot oil filters are all located on the same side at ground level for easy servicing.
6.3. Upper-structure handrails provide added safety when servicing the engine compartment, and a larger hood gives you better engine accessibility.
6.4. Our field-proven technology is simple and efficient, employing cooled exhaust gas recirculation (EGR), a diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR). An improved piston design allows particulate matter to be burned in cylinder, so there’s no need for a diesel particulate filter (DPF).
6.5. A battery disconnect switch, located in the rear door behind the cab, is easily accessible and extends battery life.
6.6. The FT4 engine solution does not require a diesel particulate filter (DPF), saving service time and lowering operating costs.
7. ZXLink™
7.1. The ZX350LC-6 is standard equipped with Hitachi’s ZXLink™ system, giving you the power to optimize your operation and maximize your profits. With the support of your dealer you can use your data to reduce idling time as well as maximize productivity and uptime. Without ever leaving your seat you’ll have access to fleet location, functions, hours, fuel consumption, alerts and other essential machine data. You can also view location and alert information in the field from your iOS or Android devices.
8. Grade Guidance
8.1. Optional integrated Grade Guidance developed in cooperation with Topcon increases efficiency on your jobs. Manage grades in real-time with a 2D or 3D system. Your machine arrives ready to work with the system installed, measured and calibrated. It’s a one-stop-shop solution supported by our reliable dealer network.
SPECIFICATIONS :
Emission Rating
Tier 4
Number Of Cylinders
6
Displacement
7.8 ltr
475 Inches³
475 Inches³
Rated speed
1900 rpm
Engine Output - Net
202 kW
271 hp
271 hp
Number Of Carrier Rollers - Each Side
2
Number Of Track Rollers - Each Side
8
Track Shoe Width
800 mm
32 inches
32 inches
Transport Length Mono Boom
11290 mm
37 ft ft/in
37 ft ft/in
Transport Height - Maximum
3600 mm
11 ft 10 in ft/in
11 ft 10 in ft/in
Overall Undercarriage Width
3390 mm
11 ft 2 in ft/in
11 ft 2 in ft/in
Track Length On Ground
4050 mm
13 ft 3 in ft/in
13 ft 3 in ft/in
Overall Undercarriage Length
4940 mm
16 ft 2 in ft/in
16 ft 2 in ft/in
Tailswing Radius
3600 mm
11 ft 10 in ft/in
11 ft 10 in ft/in
Ground Clearance
510 mm
20 inches
20 inches
Width over fixed tracks
3390 mm
11 ft 2 in ft/in
11 ft 2 in ft/in
Track Gauge
2590 mm
8 ft 6 in ft/in
8 ft 6 in ft/in
Digging Reach - Mono Boom
11860 mm
38 ft 11 in ft/in
38 ft 11 in ft/in
Ground Level Reach - Mono Boom
11670 mm
38 ft 3 in ft/in
38 ft 3 in ft/in
Dig Height - Mono Boom
10750 mm
35 ft 3 in ft/in
35 ft 3 in ft/in
Dump Height - Mono Boom
7630 mm
25 ft ft/in
25 ft ft/in
Dig depth - 2.44m / 8'ft flat bottom
8040 mm
26 ft 5 in ft/in
26 ft 5 in ft/in
Dig Depth - Mono Boom
8180 mm
26 ft 10 in ft/in
26 ft 10 in ft/in
Fuel Tank
630 ltr
166 gallons (US)
166 gallons (US)
Hydraulic Tank
180 ltr
48 gallons (US)
48 gallons (US)
Ground Bearing Pressure
49.3 kPa
7.15 PSI
7.15 PSI
Dipper Tearout
159 kN
35745 lbf
35745 lbf
Operating Weight
35090 kg
77360 lbs
77360 lbs
Harga :
Info Kredit :
Sewa atau Kontrak :
Lokasi Dealer/ Showroom :
Posting Komentar